Gumeblend

A detonator-insensitive emulsion with an increased Relative Weight and Bulk Strength compared to that of ANFO. This allows for more efficient blasting and blast pattern expansion. It is pumped in bulk and only sensitized down-hole which allows for safe transportation of the explosive. It is water resistant and has a 100 percent coupling ratio down-the-hole

Usage Situations

Gemublend is a highly viscous liquid, recommended for operations requiring a large volume of explosives, particularly open-pit mines and large quarries. Gemublend is composed of a mixture of Gemugranel and porous ammonium nitrate (technical grade). Gemublend is water-resistant and can be used in dry or wet boreholes. Recommended for all types of rock (hard, semi-hard and soft). After loading boreholes with Gemublend, the product can remain in the borehole for up to 10 days before detonation.

Gemublend is applied using specially designed mechanized mobile units. These units, equipped with multiple compartments, mix several components (Gemublend bulk material, porous ammonium nitrate, and sensitizing agent) to achieve optimal sensitization of the Gemublend. The material fills the entire borehole section, allowing for optimization of the existing borehole.

After its sensitization, Gemublend is initiated using a booster (consult the FEM Technical team for your selection) with adequate capacity, taking into account the borehole diameter and the load used.

Gemublend is prepared on-site, so it is not stored after mixing.

Transport class 5.1, meaning the product offers a high level of safety during transport. Transport is carried out in mobile units specifically designed for this purpose.

Due to the fact that Gemublend is a non-sensitized explosive agent, it presents a high degree of safety in its handling and transport; however, all procedures relating to the transport and handling of explosive material must be observed. Handle with care. Risk of ignition if exposed to shock, friction, fire or other ignition sources.